Also, I found this story. Below is quoted from a forum:
>>>
My flamethrower has two main parts, a gun/hose assembly, and the tank. I made the gun first:
http://img10.imageshack.us/img10/8243/1-gun.jpg
It’s made entirely of parts you can get at your average hardware store. The hose connects to a stop valve, which connects to a short pipe nipple that's tapped directly into the tank.
http://img40.imageshack.us/img40/4795/2-valve.jpg
The tank took a while to make, because I let each set of chemical welds dry before doing the next ones. The ends of the tank are two 90 deg. elbows and two 90 deg. street elbows, welded to make two full 180 deg. "U"s. One side of the tank is a 2' length of 4" sch.40 PVC, the other is a 4"x4"x1.5" T with standard pipe attached to each 4” socket.
http://img28.imageshack.us/img28/8075/3-pipes.jpg
And two animations I made from video clips: http://img27.imageshack.us/img27/7779/animation2.gif
http://img27.imageshack.us/img27/2034/animation3.gif
<<
No comments:
Post a Comment